mplad15kp7.0a C mplad15kp200ca available s urface m ount 15,000 w att t ransient v oltage s uppressor high - reliability screening available in reference to mil - prf - 19500 description these high power 15 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize thermal resistance and cumulative heating . typical applications include light n ing and automotive load dump protection. they are particularly effective a t meeting the multi - stroke lightning standard rtca do - 160, section 22 for aircraft design . this efficient low profile package design is offered in standoff voltage selections (v wm ) of 7 volt s to 200 volts in either unidirectional or bidirectional construc tion. plad (the c athode is the metal base under the body of th is device .) also available: plad 30kp (30,000 watts) mplad 30 kp1 4 a thru mplad 30 kp 40 0ca important: for the latest information, visit our website http://www.microsemi.com . features ? available in both u nidirectional and b idirectional construction ( b idirectional with ca suffix) ? high reliability with wafer fabrication and assembly lot traceability ? all parts surge tested ? low profile surface mount package ? optional upscreening is available with various screening and conformance inspection optio ns based on mil - prf - 19500. refer to hirel non - hermetic product portfolio for more details on the screening options . ? suppresses transients up to 15 ,000 w @ 10/1000 s (see f igure 1 ) ? moisture classification is level 1 with no dry pack required per ipc/jedec j - std - 020b ? rohs compliant ver s ions are available ? 3 lot norm screening performed on s tandby c urrent (i d ) applications / benefits ? protection from switching transients and induced rf i ? protection from esd, and eft per iec 61000 -4- 2 and iec 61000 -4-4 ? secondary lightning protection per iec 61000 -4- 5 with 42 o hms source impedance: class 1,2,3,4,5: mplad15kp7.0a to 200ca ? secon dary lightning protection per iec 61000 -4- 5 with 12 o hms source impedance: class 1,2,3,4: mplad15kp7.0a to 200ca ? secondary lightning protection per iec 61000 -4- 5 with 2 o hms source impedance: class 2,3: mplad15kp7.0a to 200ca class 4: mplad15kp5.0 to 54ca ? pin injection protection per rtca/do - 160 f for waveform 4 (6.4/69 s at 25 oc )*: level 4: mplad15kp7.0a to 200ca level 5: mplad15kp7.0a to 100ca ? pin injection protection per rtca/do - 160 f for waveform 5a (40/120 s at 25 oc )*: level 4: mplad15kp7 .0a to 28ca *see micronote 132 for further temperature derating selection . msc C lawrence 6 lake street, lawrence, ma 01841 tel: 1- 800 - 446 - 1158 or (978) 620 - 2600 fax: (978) 689 - 0803 msc C ireland gort road business park, ennis, co. clare, ireland tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: www.microsemi.com rf01004, rev f (5 /16 /1 4) ?201 3 microsemi corporation page 1 of 6 downloaded from: http:///
mplad15kp7.0a C mplad15kp200ca maximum ratings @ 25 o c unless otherwise specified parameters/test conditions symbol value unit junction and storage temp erature t j and t stg - 55 to +150 oc /w thermal resistance junction - to - ambient (1) r ? ja 50 oc /w thermal resistance junction - to - case r ? jc 0. 7 oc /w peak pulse power @ 10/1000 s (2) p pp 15, 000 w t clamping (0 volts to v ( br) min) unidirectional bidirectional <100 <5 ps ns forward clamping voltage @ 500 amps (3) v fs 2.0 v forward sur ge current (3) i fsm 15 00 a solder temperature @ 10 s t sp 260 oc steady - state power dissipation (5) t a = 25 c t c = 100 c p d 2.5 (1) 71 (4) w w notes : 1. w hen mounted on fr4 pc board with recommended mounting pad (see pad layout ). 2. a lso see f igures 1 and 2 . w ith impulse repetition rate (duty factor) of 0.05% or less . 3. at 8.3 ms half - sine wave (unidirectional devices only). 4. case temperature controlled on heat sink as specified. 5. see micronote 134 for derating p pp when also applying steady - state power. mechanical and packaging ? case: void- free transfer molded thermosetting epoxy body meeting ul94v -0 ? terminals: tin -l ead or rohs c ompliant annealed matte -t in plating readily solderable per mil - std - 750, method 2026 . ? marking: body marked with part number ? polarity: for unidirectional devices, the cathode is on the metal backside (package bottom) ? available in bulk or custom tape - and - reel packaging ? tape- and -reel: standard per eia - 481 - b (add tr suffix to part number). consult factory for quantities. ? weight: approximately 1 gram ? see p ackage d imensions on last page. part nomenclature m plad 15 k p 7.0 ca ( e3 ) reliability level * m ma mx mxl *(see hirel non - hermetic product portfolio ) package designation p pp rating ( w) rohs compliance e3 = rohs c ompliant blank = non - rohs c ompliant polarity a = unidirectional ca = bidirectional reverse standoff voltage plastic rf01004, rev f (5 /16 /1 4) ?201 3 microsemi corporation page 2 of 6 downloaded from: http:///
mplad15kp7.0a C mplad15kp200ca symbols & definitions symbol definition i (b r) breakdown current: the current used for measuring b reakdown v oltage v (br) . i d standby current: the current a t the rated standoff voltage v wm . i pp peak impulse current: the peak current during the impulse. v (br) breakdown voltage: the minimum voltage the device will exhibit at a specified current. v c clamping voltage: clamping v oltage at i pp (p eak p ulse c urrent) at the specified pulse conditions (typically shown as maximum value). v wm rated working standoff voltage: the maximum peak voltage that can be applied over the operating temperature range. v(br) temperature coefficient of breakdown voltage: the change in breakdown voltage divided by change in temperat ure. electrical characteristics @ 25 oc unless otherwise stated microsemi part n umber reverse standoff voltage v wm (note 1) breakdown voltage v ( br ) @ i maximum clamping voltage v c @ i pp maximum standby current i d @ v wm maximum peak pulse current i pp (fig. 3) maximum temperature coefficient v(br) unidirectional bidirectional volts volts ma v olts a a mv/ oc mplad15kp7.0a mplad15kp7.0ca 7.0 7.78 C 8.60 150 12.0 3000 1251 * 5.0 mplad15kp7.5a mplad15kp8.0a mplad15kp7.5ca mplad15kp8.0ca 7.5 8.0 8.33 C 9.21 8.89 C 9.83 5 5 12.9 13.6 750 450 1164 * 1101 * 6.0 6.0 mplad15kp8.5a mplad15kp9.0a mplad15kp8.5ca mplad15kp9 .0ca 8.5 9.0 9.44 C 10.4 10.0 C 11.1 5 5 14.4 15.4 150 60 1041 * 975 7.0 8.0 mplad15kp10a mplad15kp11a mplad15kp10ca mplad15kp11ca 10 11 11.1 C 12.3 12.2 C 13.5 5 5 17.0 18.2 45 10 882 822 9.0 10 mplad15kp12a mplad15kp13a mplad15kp12ca mplad15kp13ca 12 13 13.3 C 14.7 14.4 C 15.9 5 5 19.9 21.5 10 10 753 696 11 12 mplad15kp14a mplad15kp15a mplad15kp14ca mplad15kp15ca 14 15 15.6 C 17.2 16.7 C 18.5 5 5 23.2 24.4 10 10 645 6 18 13 15 mplad15kp16a mplad15kp17a mplad15kp16ca mplad15kp17ca 16 17 17.8 C 19.7 18.9 C 20.9 5 5 26.0 27.6 10 10 576 543 16 18 mplad15kp18a mplad15kp20a mplad15kp18ca mplad15kp20ca 18 20 20.0 C 22.1 22.2 C 24.5 5 5 29.2 32.4 10 10 516 462 19 22 mplad15kp22a mplad15kp24a mplad15kp22ca mplad15kp24ca 22 24 24.4 C 26.9 26.7 C 29.5 5 5 35.5 38 .9 10 10 423 384 24 27 mplad15kp26a mplad15kp28a mplad15kp26ca mplad15kp28ca 26 28 28.9 C 31.9 31.1 C 34.4 5 5 42.1 45.5 10 10 357 330 29 30 mplad15kp30a mplad15kp33a mplad15kp30ca mplad15kp33ca 30 33 33.3 C 36.8 36.7 C 40.6 5 5 48.4 53.3 10 10 309 282 35 38 mplad15kp36a mplad15kp40a mplad15kp36ca mplad15kp40ca 36 40 40.0 C 44.2 44.4 C 49.1 5 5 58.1 64.5 10 10 258 234 40 45 mplad15kp43a mplad15kp45a mplad15kp43ca mplad15kp45ca 43 45 47.8 C 52.8 50.0 C 55.3 5 5 69.4 72.7 10 10 216 207 49 51 mplad15kp48a mplad15kp51a mplad15kp48ca mplad15kp51ca 48 51 53.3 C 58.9 56.7 C 62.7 5 5 77.4 82.4 10 10 195 183 55 60 mplad15kp54a mplad15kp58a mplad15kp54ca mplad15kp58ca 54 58 60.0 C 66.3 64.4 C 71.2 5 5 87.1 93.6 10 10 171 159 64 69 mplad15kp60a mplad15kp64a mpla d15kp60ca mplad15kp64ca 60 64 66.7 C 73.7 71.1 C 78.6 5 5 96.8 103 10 10 156 147 70 75 mplad15kp70a mplad15kp75a mplad15kp70ca mplad15kp75ca 70 75 77.8 C 86.0 83.3 C 92.1 5 5 113 121 10 10 132 123 84 90 mplad15kp78a mplad15kp85a mplad15kp78ca mplad15kp85 ca 78 85 86.7 C 95.8 94.4 C 104.0 5 5 126 137 10 10 120 108 94 102 mplad15kp90a mplad15kp100a mplad15kp90ca mplad15kp100ca 90 100 100 C 111 111 C 123 5 5 146 162 10 10 102 93 109 122 mplad15kp110a mplad15kp120a mplad15kp110ca mplad15kp120ca 110 120 122 C 135 133 C 147 5 5 177 193 10 10 84 78 132 145 mplad15kp130a mplad15kp150a mplad15kp130ca mplad15kp150ca 130 150 144 C 159 167 C 185 5 5 209 243 10 10 71 62 157 183 mplad15kp160a mplad15kp170a mplad15kp160ca mplad15kp170ca 160 170 178 C 197 189 C 209 5 5 259 275 10 10 58 55 195 207 mplad15kp180a mplad15kp200a mplad15kp180ca mplad15kp200ca 180 200 200 C 221 222 C 245 5 5 291 322 10 10 52 47 219 243 note 1: transient voltage suppressors are normally selected with reverse s tand o ff v oltage v wm , which shou ld be equal to or greater than the peak operating voltage . note 2: items listed in b old above are available ex - stock or with a short lead - time . * surge testing is performed to 1000amps due to equipment limitations rf01004, rev f (5 /16 /1 4) ?201 3 microsemi corporation page 3 of 6 downloaded from: http:///
mplad15kp7.0a C mplad15kp200ca graphs tp C pulse time C sec figure 1 peak pulse power vs. pulse time (to 50% of exponentially decaying pulse) test waveform parameters: tr = 10 s, tp = 1000 s figure 2 pulse waveform i pp peak pulse current - % i pp p pp peak pulse powe r - kw rf01004, rev f (5 /16 /1 4) ?201 3 microsemi corporation page 4 of 6 downloaded from: http:///
mplad15kp7.0a C mplad15kp200ca graphs (conti nued) t l lead temperature oc figure 3 derating curve p pp peak pulse power - kw rf01004, rev f (5 /16 /1 4) ?201 3 microsemi corporation page 5 of 6 downloaded from: http:///
mplad15kp7.0a C mplad15kp200ca package dimensions ref. dimensions inch millimeters min max min max a1 0.485 0.495 12.32 12.57 a2 0.445 0.455 11.30 11.56 b 0.145 0.155 3.68 3.94 c 0.585 0.595 14.86 15.11 d 0.200 0.210 5.08 5.33 f 0.008 0.013 0.20 0.33 g 0.055 0.065 1.40 1.65 h 0.015 0.025 0.38 0.64 j 0.062 typ. 1.57 typ. r1 0.030 typ. 0.76 typ. r2 0.045 typ. 1.14 typ. pa d layout ref. dimensions inch millim eters min max min max a 0.465 0.475 11.81 12.07 b 0.225 0.235 5.72 5.97 c 0.095 0.105 2.41 2.67 d 0.04 0.05 1.02 1.27 rf01004, rev f (5 /16 /1 4) ?201 3 microsemi corporation page 6 of 6 downloaded from: http:///
|
